🏾 Content :
- Ⅰ. Overview
- Ⅱ. Features and Benefits
- Ⅲ. Specifications PES membrane (for example)
- Ⅳ. Part Number Matrix
- Ⅴ. How to order our products and for more informations
Ⅰ. Overview
Membrane Solutions (MS) SteriBell 50TM PES devices offer a convenient and efficient way to sterile filter large volumes using a peristaltic pump or other pressurized source.
SteriBell 50 is ideal for for biological products when low protein binding is required and also for broad range ( pH 1 – 12) of acid ad base solutions.
This PES filter is also available with glass fiber (GF) prefilter for samples with high particulates. We can provide all type of filters
SteriBell50TM Filtration Device
Ⅱ. Features and Benefits
- Superior flow rates compared to most competitive products, offers reduced filtration times.
- Optional glass fiber prefilter layer offers superior throughput for difficult to filter solutions, buffers, media and serums : fewer changeouts and fewer devices required.
- Sterile Filtration : eliminates the need for post-filtration sterilization.
- Integrity testable : to ensure sterility.
- Can be used as an inline or POU filter : offers convenient use.
- Available with detachable filling bell : helps prevent splashing and contamination.
- Tapered hose barb accepts different tubing sizes : offers connection flexibility.
- Pre-sterilized by gamma irradiation : eliminates contamination associated with EtO.
- Sterile packaged, eliminates for pre-sterilization.
- Disposable : offers convenience versus replacing discs in discs holders.
- pH range : 1-12.
Ⅲ. Specifications PES membrane (for example)
Specifications PES membrane |
|||
|---|---|---|---|
| SteriBell 50TM PES | SteriBell 50TM PES Plus | ||
| Housing | Polypropylene | ||
| Filling bell | Polycarbonate bell with polypropylene cap | ||
| Membrane | PES | Glass fiber prefilter+PES | |
| Housing OD | 64 mm | ||
| Pore size | 0.2 µm | ||
| Filtration area | 20 cm2 | ||
| Pre-sterilized by | Gamma irradiation | ||
| Typical Sample Volume | Up to 5L | ||
| Water Flow Rate | 400 mL/min with water at 14.5 psi (1 bar) | ||
| Typical Hold-Up Volume (with 10 psi air purge) | ≤ 1.0 mL | ≤ 1.5 mL | |
| Recommended inlet pressure | ≤43.5 psi (3.0 bar) | ||
| Burst pressure | 73 psi (5.0 bar) | ||
| Bubble point | ≥46.4 psi (3.2 bar) | ||
| Connections | 1/4-1/2" (7-13mm) stepped HB. Inlet will accept male luer slip tip. Outlet comes with detachable filling bell and cap. | ||
| Endotoxin Level | < 0.25 EU/mL | ||
| Protein adsorption (Filtration of BSA) | No detectable loss of protein | < 80 µg/cm2 | |
| Bacterial Retention | >107 CFU/cm2 of B. diminuta | ||
| Biosafety | USP Class VI Plastics Test | ||
Ⅳ. Part Number Matrix
Specifications PES membrane |
|||||||
|---|---|---|---|---|---|---|---|
| Membrane Material | Filter Diameter (mm) | Pore Size (μm) | Pre-Sterilized | Optional Pre-filter layer | Series | ||
| SU | PES | 050 | 022 | N/S | G | B | |
| PES (0.1-1.0) CA (0.2-5.0) MCE (0.2-5.0) Nylon (0.2-5.0) PTFE (0.2-5.0) |
050=50 | 022=0.2 045=0.45 100=1.0 |
N=No S=Yes |
(blank)=None P=PP microfiber G=Glass fiber |
(blank)=without bell B=with bell |
||
SUPES050022SB= SteriBell 50TM sterile PES filter will filling bell, 1/4-1/2" (7-13mm) stepped HB inlet and outlet, 50mm,0.22um
Ⅴ. How to order our products and for more informations
We can provide all type of filters from microfiltration membrane to Ultrapure Water systemes with very competitive qualities and prices.
if you want to order, need more details or technique support, please contact us at microbioclinique@gmail.com
We make every effort to ensure that our website contains complete and up-to-date information on all our products. If you cannot find the desired product, please contact us.